IP to Relay/COM Port/Lighting Controller

SKU: CDPS-RLY
CDPS-RLY - 45 degree
CDPS-RLY - 45 degree
CDPS-RLY - Front
CDPS-RLY - Back
Overview

This controller is designed for flexible multi-purpose integrated system control via triggers, relays and RS-232. With 8 Relays, 8 PWM (Pulse Width Modulation) output ports with configurable duty cycles, 8 adjustable voltage outputs, and 1 serial control output port (supporting RS-232/422/485 and DMX-512) this unit provides the ability to control up to 25 connected devices. The unit itself is controlled by either an RS-232 or telnet connection and the inclusion of PoE (PD) support allows for a large amount of installation flexibility.

Specification

  • Includes 1 configurable serial output and 8 Relay, 8 PWM and 8 Voltage outputs
  • Relay ports support close, open and toggle control functionality with LED indicators and power support up to 30V/10A DC
  • PWM outputs support 10V with a 0~100% adjustable duty cycle
  • Voltage outputs provide from 0 to 10 volts with the power adjustable in 0.1 volt steps (0, 0.1, 0.2~10 volts)
  • Configurable serial output supports RS-232/422/485 with an adjustable baud rate
  • DMX512 data transmissions up to 250Kbaud/s are supported with unidirectional, serial transmission and a daisy-chain configuration up to 512 nodes with a max time of 22ms (roughly 44Hz)
  • RS-232/console supports up to 256 bytes per command
  • 5V/2.6A to 24V/1.2A DC power supply support
  • RS-232 and telnet control
  • Control port supports receiving power via PoE

Inputs 1x RJ-45 [1x IP Control]
1x DE-9 [1x RS-232 Data]
1x USB Type-A [1x SERVICE Propriety Data]
Outputs 8x Terminal Block 2-pin [8x Relay]
1x Terminal Block 5-pin [1x RS-232/422/485/DMX512]
8x Terminal Block 2-pin [8x PWM OUT (10V) Power Block]
8x Terminal Block 2-pin [8x VOLTAGE OUT (0~10V) Power Block]
PSU: 5V/2.6A
Dimensions 200mm [W] x 95mm [D] x 31mm [H]
Net Weight 548g
Downloads