4K HDR HDMI over HDBaseT Transmitter with IR, RS-232 & PoH (PSE)

SKU: CH-1527TXPLV
CH-1527TXPLV - 45 degree
CH-1527TXPLV - 45 degree
CH-1527TXPLV - Front
CH-1527TXPLV - Back
Overview

This Transmitter is a great solution for extending UHD video and audio as well as control via a single run of Cat.5e/6/7 cable over distances up to 70 meters. This Transmitter complies with the advanced HDCP 2.2 and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and HDMI 1.x standards. Despite HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be processed and extended by the use of AVLC (Adaptive Visually Lossless Compression) when needed. Multiple data and control interfaces are also provided, including IR and RS-232 connections. This Transmitter (PSE) can provide 48V PoH (Power over HDBaseT) to a compatible Receiver (PD), allowing for greater flexibility within different installation scenarios.

Specification

  • HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.x compliant
  • Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output
  • Supports Deep Color input and output up to 12-bit
  • Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
  • Supports CEC bypass
  • Simultaneous transmission of uncompressed video, audio and data over a single Cat.5e/6/7 cable up to 70m/230ft at 1080p and 35m/115ft at 4K
  • HDBaseT feature support: HD Video and Audio, 48V PoH, and Control (bidirectional IR/RS-232 pass-through)
  • Integrated AVLC (Adaptive Visually Lossless Compression) activates when the bandwidth requirements of the source are beyond 10.2Gbps (340MHz) allowing for sources up to 18Gbps (600MHz) to be sent to a compatible Receiver with no loss of visual quality
  • The AVLC feature allows manual selection between High Quality Mode (Full bandwidth) and Standard Mode (Lower bandwidth, useful for longer cable runs with 4K sources)
  • Supports standard 48V PoH from Transmitter (PSE) to Receiver (PD) (compatible Receivers only)

Inputs 1x HDMI [1x Uncompressed AV and Data]
1x 3.5mm Stereo Mini-jack [1x IR2 Infrared Receiver]
1x 9-pin D-sub [1x RS-232 Data]
Outputs 1x RJ45 [1x HDMI & Propriety Data]
1x 3.5mm Stereo Mini-jack [1x IR1 Infrared Emitter]
PSU: 48V/0.83A
Dimensions 128mm [W] x 117mm [D] x 25mm [H]
Net Weight 385g
Downloads