HDBaseT to HDMI/USB Receiver

SKU: CH-2606RX
CH-2606RX - 45 degree
CH-2606RX - 45 degree
CH-2606RX - Front
CH-2606RX - Back
This HDBaseT 2.0 Receiver is a great solution for receiving uncompressed HD audio and video as well as Ethernet and control via a single run of Cat.5e/6/7 cable over distances of up to 100 meters.
Multiple data and control signal types are supported, including USB 2.0, IR, RS-232 and LAN connections. An independent balanced analog stereo audio output is also provided to support easy audio signal extension from compatible Transmitters. The HDBaseT input supports receiving resolutions up to a maximum of 4K@30Hz (4:4:4, 8-bit) or 4K@60Hz (4:2:0, 8-bit) from a compatible HDBaseT Transmitter.
When paired with this unit’s standard Transmitter, 2 switchable USB 2.0 host (Type B) connections are available (1 on the Transmitter, 1 on the Receiver) which can connect to devices on up to 6 USB 2.0 (Type A) ports (3 on the Transmitter, 3 on the Receiver) forming a highly flexible KVM extension configuration (Note: Only 1 USB host may be active at a time).
This Receiver (PSE) can provide PoH (Power over HDBaseT) power to the connected HDBaseT Transmitter (PD) (compatible Transmitters only), allowing for greater flexibility within different installation scenarios. This unit is controllable via front panel button.
  • HDMI 2.0 and DVI 1.0 compatible 
  • HDCP 2.2 and HDCP 1.x compliant 
  • HDBaseT 2.0 compatible 
  • 1 HDBaseT input and 1 HDMI output 
  • 3 USB 2.0 Type A ports and 1 USB 2.0 Type B port 
  • Supports HDBaseT input resolutions up to 4K@60Hz (4:2:0, 8-bit) 
  • HDMI output supports resolutions up to 4K@60Hz (4:2:0, 8-bit) 
  • HDBaseT input receives video, audio, and data over a single Cat.5e/6/7 cable and can reach distances up to 100m/230ft at 4K when using Cat.6a/7 
  • HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet, PoH (PSE), and control (bi-directional IR/RS-232/USB 2.0) 
  • Supports CEC bypass 
  • Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream from HDMI sources 
  • Reception of independent analog stereo audio extension 
  • Flexible USB host selection using the front panel button
  • Note: Multiple USB hosts may be connected at once (up to 2 total, between the Tx and a compatible Rx unit) with a single selected host active at a time
  • Supports local power, or power via PoH from Receiver (PSE) to Transmitter (PD) (compatible Receivers only) 
  • Controllable via a front panel button
Inputs 1x RJ-45 [1x HDMI & Propriety Data]
3x USB Type-A [3x Propriety Data]
1x USB Type-B [1x Propriety Data]
3x 1-Pin Terminal Block [1x RS-232]
Outputs 1x HDMI [1x Uncompressed AV and Data]
PSU: 24V/2.7A
Dimensions 235mm [W] x 108mm [D] x 25mm [H]
Net Weight 647g