HDMI/USB to HDBaseT Transmitter

SKU: CH-2606TX
CH-2606TX - 45 degree
CH-2606TX - 45 degree
CH-2606TX - Front
CH-2606TX - Back
Overview
This HDBaseT 2.0 Transmitter is a great solution for extending uncompressed HD audio and video as well as Ethernet and control via a single run of Cat.5e/6/7 cable over distances of up to 100 meters.
Multiple data and control signal types are supported, including USB 2.0, IR, RS-232 and LAN connections. An independent analog stereo audio input is also provided to enable easy audio signal extension. The HDMI input supports transmitting resolutions up to a maximum of 4K@30Hz (4:4:4, 8-bit) or 4K@60Hz (4:2:0, 8-bit) over HDBaseT to a compatible Receiver.
When paired with this unit’s standard Receiver, 2 switchable USB 2.0 host (Type B) connections are available (1 on the Transmitter, 1 on the Receiver) which can connect to devices on up to 6 USB 2.0 (Type A) ports (3 on the Transmitter, 3 on the Receiver) forming a highly flexible KVM extension configuration (Note: Only 1 USB host may be active at a time).
This Transmitter (PD) may be powered locally using a standard power supply, or it can be powered by PoH (Power over HDBaseT) provided by a compatible Receiver (PSE), allowing for greater flexibility within different installation scenarios. This unit is controllable via front panel button and RS-232.
Specification
  • HDMI 2.0 and DVI 1.0 compatible 
  • HDCP 2.2 and HDCP 1.x compliant 
  • HDBaseT 2.0 compatible 
  • 1 HDMI input and 1 HDBaseT output 
  • 3 USB 2.0 Type A ports and 1 USB 2.0 Type B port 
  • Supports HDMI input resolutions up to 4K@60Hz (4:2:0, 8-bit) 
  • HDBaseT output supports resolutions up to 4K@60Hz (4:2:0, 8-bit) 
  • HDBaseT output transmits video, audio, and data over a single Cat.5e/6/7 cable and can reach distances up to 100m/230ft at 4K when using Cat.6a/7 
  • HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet, PoH (PD), and control (bi-directional IR/RS-232/USB 2.0) 
  • Supports CEC bypass 
  • Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream from HDMI sources 
  • Independent analog stereo audio extension 
  • Flexible USB host selection using the front panel button
  • Note: Multiple USB hosts may be connected at once (up to 2 total, between the Tx and a compatible Rx unit) with a single selected host active at a time
  • Supports PoH from Receiver (PSE) to Transmitter (PD) (compatible Transmitters only)
  • Controllable via front panel button and RS-232
Inputs 1x HDMI [1x Uncompressed AV and Data]
3x USB Type-A [3x Propriety Data]
1x USB Type-B [1x Propriety Data]
3x 1-Pin Terminal Block [1x RS-232]
1x 3.5mm [1x Stereo(L/R)]
Outputs 1x RJ-45 [1x HDMI & Propriety Data]
PSU: 24V/2.7A
Dimensions 231mm [W] x 108mm [D] x 25mm [H]
Downloads