HDMI over IP Receiver

This unit is an HDMI over IP Receiver that allows you to receive extended HDMI signals using the TCP/IP protocol over regular Cat.5e network cable. This extender supports the reception of High-Definition signals (up to 1080p@60Hz) with audio up to 100m over a single cable. The distance can be further extended (up to 100m per segment) by using Gigabit Ethernet network switches, allowing the user to cascade the system without signal loss or introducing delay. This Receiver also features bi-directional IR and RS-232 pass-through.

It is also possible to for this Receiver to operate in multicast mode, allowing large groups of Receivers within the same local network to receive the same AV signal with no additional bandwidth cost. Additionally, that same multicast signal can be used to create large multi-display video walls with amazing simplicity.

This Video over IP system is perfect for both residential and commercial installation environments. Configuration information is provided via the On-Screen Display (OSD) when the unit is unlinked and control is via front panel buttons, WebGUI, Telnet, or the AV over IP Master Controller.

• HDMI 1.4 and DVI 1.0 compliant
• HDCP 1.4 compliant
• 1 HDMI output
• Video, audio and control reception over TCP/IP in Unicast (point- to-point) or Multicast (single-to-many) modes
• Multi-monitor video wall support with 180° and 270° rotation options
• Video output can be scaled to a selected resolution, or left unscaled
• HDMI output supports resolutions up to 1080p@60Hz/WUXGA
• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream
• Supports IR and RS-232 bypass
• Unit has an info OSD (when unlinked) and can be controlled via front panel buttons, WebGUI, Telnet, and the AV over IP Master Controller

Manual CH-331H-RX_Datasheet_v1.0.2