UHD AV over IP Transceiver

CH-U331TR - 45 degree
CH-U331TR - 45 degree
CH-U331TR - Front
CH-U331TR - Back

The Dual-Format 4K UHD AV over IP Transceiver are innovation design of integrate Transmitter and Receiver into one unit; user could able to switch unit into Transmitter or receiver by the needs. The Transceiver supports the transmission of Ultra High-Definition signals (up to 4K@30Hz, 4:4:4 or 4K@60Hz, 4:2:0) with audio and USB up to 100 meters on a single cable. The transmission distance can be further extended (up to 100 meters per segment) by using gigabit network switches, or using SFP fiber cable to extend (up to 550m~2km, depends on the Fiber module that been used), allowing the user to cascade the system without signal loss or introducing delay. It is also possible to have the Transmitter operate in multicast mode, allowing you to send a single AV signal to a large number of Receivers within the same local network.

• Video, audio, and control transmission over TCP/IP in Unicast(point-topoint) or Multicast (single-to-many, many-to-many) modes
• The analog Line In sends audio directly to the analog Line Out and is inserted into the HDMI output
• Unit may powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)
• Supports USB keyboard, mouse and storage extension
• Device has an info OSD and can be controlled via WebGUI, Telnet, and front panel controls
• Depends on different site scenario to configure as Transmitter or Receiver and easy maintain the stock and spare unit
Inputs 1x HDMI [1x Type-A]
1x DisplayPort [1x Uncompressed AV]
1x 3.5mm [1x Stereo(L/R)]
8x 10-Pin Terminal Block [8x Trigger]
2x USB Type-A [2x Propriety Data]
1x USB Type-B [1x Propriety Data]
1x 3.5mm [1x Infrared Receiver]
1x 6-Pin Terminal Block [1x RS-232]
Outputs 1x HDMI [1x Type-A]
1x 3.5mm [1x Stereo(L/R)]
1x SFP Slot [1x Fiber LAN]
1x RJ-45 [1x LAN Serving]
1x 3.5mm [1x Infrared Emitter]
PSU: 5V/4A
Dimensions 231mm [W] x 167mm [D] x 25mm [H]
Net Weight 929g