1×4 Dual CAT6/7 to HDMI Splitter

CLUX-1CAT4H - 45 degree
CLUX-1CAT4H - 45 degree
CLUX-1CAT4H - Front
CLUX-1CAT4H - Back
​The 1 by 4 CAT6 to HDMI splitter is the smart way to link and display a single HDMI source on three or more screens simultaneously. Not only can it send an HDMI source to three different displays, but it can also act like a router, when connected to another CAT6 splitter it can transfer an HDMI signal to a further 3 displays, making a total of six showing the same source instead of only three. This unit allows users to transmit HDMI signals via CAT6 without compression over long distance. The CAT6 to HDMI splitter also incorporates functions like EDID, System Reset, Deep color and IR systems.
  • ​HDMI, HDCP1.1 and DVI1.0 compliant
  • Deep Color video up to 12-bit, 1080p@60Hz
  • Allows users to link up to three displays
  • HDCP keysets allows each output to work independently when connected to an HDMI display
  • Supports both DVI source and display by using an HDMI to/from DVI adaptor cable
  • Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission (32-192 kHz Fs sample rate)
  • Has a wide range of PC and HDTV resolutions from VGA to SXGA and 480i to 1080p
  • Selects EDID from TV mode or STD mode (this splitter)
  • Deep Color setting of 8-bit or 12-bit
  • IR remote control
  • System Reset function
  • CEC Bypass
Inputs 2x RJ45 [1x HDMI & Propriety Data]
1x 3.5mm Stereo Mini-jack [1x Infrared Receiver]
Outputs 2x RJ45 [1x HDMI & Propriety Data]
3x HDMI [3x Uncompressed AV and Data]
1x 3.5mm Stereo Mini-jack [1x Infrared Emitter]
PSU: 5V/3A
Dimensions 215mm [W] x 133mm [D] x 43mm [H]
Net Weight 900g

    Available Transmitter / Receiver